Topic 9.3: Gibbs Free Energy and Thermodynamic Favorability Revision Notes

One Number Settles Favorability

ΔG° is the verdict. Enthalpy and entropy pull in their own directions, and neither settles the question alone. The Gibbs free energy change combines them into one quantity whose sign decides whether a reaction is favorable under standard conditions.

Negative means favorable. ΔG° < 0: the reaction as written is favorable, and products are favored at equilibrium. ΔG° > 0: it is unfavorable as written, and reactants are favored at equilibrium.

Zero means equilibrium. The value below marks the balance point: forward and reverse reactions run at equal rates and the composition stops changing. Zero is not “nothing happening.”

ΔG° = 0

Favorability is not speed. A strongly negative ΔG° says a reaction can proceed, not that it proceeds quickly.

Free energies add. Combined processes add their ΔG° values: a step at +30 kJ mol⁻¹ coupled to one at −50 kJ mol⁻¹ gives an overall ΔG° of −20 kJ mol⁻¹.

The Gibbs Equation

The Gibbs equation. ΔH° is the enthalpy change, in kJ mol⁻¹. T is the absolute temperature, in kelvin: a Celsius temperature must have 273 added before use. ΔS° is the entropy change, in J mol⁻¹ K⁻¹, multiplied by T and subtracted.

ΔG° = ΔH° − TΔS°

Read the minus sign carefully, and respect T. Because the entropy term is subtracted, a positive ΔS° pulls ΔG° down toward favorability while a negative ΔS° pushes it up, and either effect grows with temperature. At low temperature TΔS° is small and enthalpy decides; at high temperature it can outweigh ΔH° entirely.

Convert the Units First

The two terms arrive in different units. ΔH° is tabulated in kJ mol⁻¹, ΔS° in J mol⁻¹ K⁻¹. Divide ΔS° by 1000 before the two can be combined.

The planted error. Leaving ΔS° in joules makes the TΔS° term 1000 times too large. For ΔH° = −120 kJ mol⁻¹ and ΔS° = −150 J mol⁻¹ K⁻¹ at 298 K, unconverted working gives ΔG° = +44,580 kJ mol⁻¹; converted, ΔS° = −0.150 kJ mol⁻¹ K⁻¹ gives −75.3 kJ mol⁻¹.

The Four Sign Combinations

ΔH° negative, ΔS° positive: favorable at all temperatures. Both terms push ΔG° negative, so no temperature rescues the reverse reaction. With ΔH° = −45 kJ mol⁻¹ and ΔS° = +120 J mol⁻¹ K⁻¹, ΔG° is −57 kJ mol⁻¹ at 100 K and −165 kJ mol⁻¹ at 1000 K.

ΔH° positive, ΔS° negative: favorable at no temperature. Both terms push ΔG° positive. With ΔH° = +40 kJ mol⁻¹ and ΔS° = −60 J mol⁻¹ K⁻¹, ΔG° is +46 kJ mol⁻¹ at 100 K and +100 kJ mol⁻¹ at 1000 K.

ΔH° negative, ΔS° negative: favorable at low temperatures only. Enthalpy favors, entropy opposes. The enthalpy term wins while T is small; as T climbs the subtracted term grows until ΔG° crosses zero. With ΔH° = −120 kJ mol⁻¹ and ΔS° = −150 J mol⁻¹ K⁻¹, ΔG° is −105 kJ mol⁻¹ at 100 K but +30 kJ mol⁻¹ at 1000 K.

ΔH° positive, ΔS° positive: favorable at high temperatures only. Entropy favors, enthalpy opposes, so the reaction waits until TΔS° outgrows ΔH°. With ΔH° = +90 kJ mol⁻¹ and ΔS° = +300 J mol⁻¹ K⁻¹, ΔG° is +60 kJ mol⁻¹ at 100 K and −210 kJ mol⁻¹ at 1000 K.

The Crossover Temperature

The crossover temperature. Setting the Gibbs equation to zero gives the one temperature at which a same-sign reaction sits exactly at equilibrium, with ΔS° in kJ mol⁻¹ K⁻¹ to match ΔH°; substituting it back returns ΔG° = 0 exactly.

T = ΔH° / ΔS°

A crossover exists only when the signs match. With opposite signs the ratio ΔH° / ΔS° is negative, and a negative kelvin temperature is impossible. That marks the always-favorable or never-favorable cases.

Which side is favorable depends on the case. Both negative: favorable below the crossover, as with ΔH° = −80 kJ mol⁻¹ and ΔS° = −200 J mol⁻¹ K⁻¹, favorable below 400 K. Both positive: favorable above it, as with ΔH° = +90 kJ mol⁻¹ and ΔS° = +300 J mol⁻¹ K⁻¹, favorable above 300 K.

For a phase change, the crossover is the transition temperature. Melting has ΔH° > 0 and ΔS° > 0, so solid and liquid are in equilibrium at one temperature under standard pressure: the melting point. Below it freezing is favorable; above it, melting is.

Predict the Sign of ΔS° First

Count gas moles. Gases carry far more entropy than liquids or solids, so the gas count settles most sign questions. In the reaction below, three moles of gas become two, so ΔS° is negative before any data is consulted. Producing gas from condensed phases gives ΔS° positive; burying gas gives it negative.

2 CO(g) + O₂(g) → 2 CO₂(g)

Phase changes speak plainly. Sublimation, solid to gas, has a positive entropy change: dry ice subliming is the standard example. Condensation and freezing have negative ones. With the sign of ΔH°, these predictions place a reaction in one of the four cases before any number is used.

Worked Examples

Example 1: ΔH° = −120 kJ mol⁻¹, ΔS° = −150 J mol⁻¹ K⁻¹. Convert first: ΔS° = −0.150 kJ mol⁻¹ K⁻¹. At 298 K, ΔG° = −120 − (298)(−0.150) = −120 + 44.7 = −75.3 kJ mol⁻¹, so the reaction is favorable at 298 K. Both quantities are negative, so a crossover exists: T = 120 / 0.150 = 800 K.

Example 2: ΔH° = +90 kJ mol⁻¹, ΔS° = +300 J mol⁻¹ K⁻¹. Convert: ΔS° = +0.300 kJ mol⁻¹ K⁻¹. Both positive, so find the crossover: T = 90 / 0.300 = 300 K. Check either side: at 250 K, ΔG° = 90 − (250)(0.300) = +15 kJ mol⁻¹, unfavorable; at 350 K, ΔG° = 90 − (350)(0.300) = −15 kJ mol⁻¹, favorable.

Example 3: ΔH° = −45 kJ mol⁻¹, ΔS° = +120 J mol⁻¹ K⁻¹. Convert: ΔS° = +0.120 kJ mol⁻¹ K⁻¹. At 500 K, ΔG° = −45 − (500)(0.120) = −105 kJ mol⁻¹. At 100 K, ΔG° = −45 − (100)(0.120) = −57 kJ mol⁻¹. Both are negative, as the signs alone require.

Example 4: ΔH° = −80 kJ mol⁻¹, ΔS° = −200 J mol⁻¹ K⁻¹. Convert: ΔS° = −0.200 kJ mol⁻¹ K⁻¹. The crossover is T = 80 / 0.200 = 400 K. At 350 K, ΔG° = −80 − (350)(−0.200) = −10 kJ mol⁻¹, favorable; at 450 K, ΔG° = −80 − (450)(−0.200) = +10 kJ mol⁻¹, unfavorable.

Traps That Cost Marks in Topic 9.3

Using Celsius in the equation. The Gibbs equation takes kelvin. Running a calculation at “25” instead of 298 K shrinks the entropy term almost to nothing.

Skipping the unit conversion. ΔS° in joules beside ΔH° in kilojoules makes the entropy term 1000 times too large, as the +44,580 kJ mol⁻¹ blunder shows.

Reading ΔG° = 0 as “no reaction”. Zero means equilibrium, with forward and reverse reactions continuing at equal rates.

Reading “favorable” as “fast”. ΔG° judges whether a reaction can proceed and which side equilibrium favors, never how quickly.

Reporting a crossover for opposite signs. Opposite signs make T = ΔH° / ΔS° negative. That is the signal to reclassify the reaction as always or never favorable.

Assuming exothermic means always favorable. An exothermic reaction with ΔS° < 0 loses at high temperature once the entropy penalty outgrows the heat released.

Key Relationships

  • ΔG° = ΔH° − TΔS°, with T in kelvin and ΔS° converted to kJ mol⁻¹ K⁻¹ before use
  • ΔG° < 0 means thermodynamically favorable as written, with products favored at equilibrium
  • ΔG° > 0 means unfavorable as written, with reactants favored at equilibrium; ΔG° = 0 means equilibrium
  • ΔH° < 0 with ΔS° > 0 is favorable at all temperatures; ΔH° > 0 with ΔS° < 0 is favorable at none
  • ΔH° < 0 with ΔS° < 0 is favorable at low temperatures; ΔH° > 0 with ΔS° > 0 is favorable at high temperatures
  • Same-sign pairs have a crossover temperature T = ΔH° / ΔS° where ΔG° = 0; opposite-sign pairs have none
  • For a phase change under standard pressure, the crossover temperature is the melting or boiling point
  • Reversing a reaction flips the sign of ΔG°; combined processes add: overall ΔG° is the sum of the steps’ ΔG° values

1 thought on “Topic 9.3: Gibbs Free Energy and Thermodynamic Favorability Revision Notes”

Leave a Comment