Master AP Chemistry Topic 7.11 with this free practice quiz. Test your skills on solubility product, molar solubility, dissociation equations, and comparing solubilities to prepare for your AP exam.
Report a question
What a Solubility Equilibrium Is
When a sparingly soluble salt sits in water, a dynamic equilibrium exists between the undissolved solid and its ions.
For silver chloride it is
AgCl(s) ⇌ Ag⁺(aq) + Cl⁻(aq)
The equilibrium constant for this process is called the solubility product, Ksp. Ksp is fixed at a given temperature and does not depend on how much solid is present.
Ksp is small for sparingly soluble salts, often between 10⁻⁵ and 10⁻⁴⁰, so very little solid dissolves before the solution saturates. The exam only asks about these slightly soluble salts. A saturated solution holds the maximum dissolved amount at equilibrium, with solid still there.
Writing Ksp Expressions
The rules match every other equilibrium expression: pure solids are omitted, so only the aqueous ions appear, each raised to the power of its stoichiometric coefficient.
For AgCl, the expression is
Ksp = [Ag⁺][Cl⁻]
For CaF₂, the expression is
Ksp = [Ca²⁺][F⁻]²
with the fluoride squared. For Ag₂CrO₄, the expression is
Ksp = [Ag⁺]²[CrO₄²⁻]
with the silver squared. For PbCl₂, the expression is
Ksp = [Pb²⁺][Cl⁻]²
The most common writing error is putting the coefficient inside the brackets, as in [2F⁻], or forgetting the exponent.
Molar Solubility
Molar solubility, symbol s, is the moles of solid that dissolve per liter of saturated solution, in mol/L. It is not the same number as Ksp, and confusing the two is a classic error.
Dissolving s mol/L gives: AgCl, [Ag⁺] = [Cl⁻] = s; CaF₂, [Ca²⁺] = s and [F⁻] = 2s; Ag₂CrO₄, [Ag⁺] = 2s and [CrO₄²⁻] = s; Fe(OH)₃, [Fe³⁺] = s and [OH⁻] = 3s.
The general patterns are worth memorizing. 1:1 salt: Ksp = s². 1:2 or 2:1 salt: Ksp = 4s³. 1:3 salt: Ksp = 27s⁴.
Ksp and Molar Solubility in Both Directions
Substitute the s expressions into the Ksp expression. For AgCl with s = 1.3 × 10⁻⁵ M, Ksp = s² = (1.3 × 10⁻⁵)² = 1.7 × 10⁻¹⁰. For CaF₂ with s = 2.1 × 10⁻⁴ M, Ksp = 4s³ = 4(2.1 × 10⁻⁴)³ = 3.7 × 10⁻¹¹.
A rounding note on CaF₂. Tables quote Ksp = 3.9 × 10⁻¹¹ for CaF₂, while the calculation from s = 2.1 × 10⁻⁴ M gives 3.7 × 10⁻¹¹. The two agree once s is rounded to two significant figures.
Work backward by solving for s. For Mg(OH)₂ with Ksp = 5.6 × 10⁻¹², Ksp = 4s³, so s is the cube root of Ksp ÷ 4, which gives s = 1.1 × 10⁻⁴ M. For Fe(OH)₃ with Ksp = 2.8 × 10⁻³⁹, Ksp = 27s⁴, so s is the fourth root of Ksp ÷ 27, about 1.0 × 10⁻¹⁰ M. The skill being tested is setting up the correct power relationship, not arithmetic.
Qsp versus Ksp: Predicting Precipitation
Qsp is the ion product computed from current concentrations, exactly as Q relates to K. If Qsp is less than Ksp, the solution is unsaturated and more solid can dissolve. If Qsp equals Ksp, the solution is saturated and sits at equilibrium. If Qsp is greater than Ksp, the solution cannot hold that many ions, so solid precipitates until Qsp falls back to Ksp.
Mixing dilutes the ions. When two solutions are mixed, each ion is diluted, and you must use the diluted concentrations in Qsp. Equal volumes halve every concentration; for unequal volumes, use moles divided by total volume. Forgetting the dilution is the most common precipitation error. Mixing to [Pb²⁺] = 0.0010 M and [I⁻] = 0.0020 M gives Qsp = (0.0010)(0.0020)² = 4.0 × 10⁻⁹, below Ksp = 9.8 × 10⁻⁹ for PbI₂, so no precipitate forms.
Comparing Solubilities
You may only rank solubilities directly from Ksp values when the salts have the same stoichiometry. For 1:1 salts, a larger Ksp means a larger molar solubility, since s = √Ksp.
The exam loves this trap. AgCl has Ksp = 1.8 × 10⁻¹⁰ while CaF₂ has Ksp = 3.9 × 10⁻¹¹, yet CaF₂ is more soluble: its molar solubility is about 2.1 × 10⁻⁴ M versus 1.3 × 10⁻⁵ M for AgCl. Always convert to molar solubility before comparing salts with different formulas. Within one stoichiometry the ranking is safe: AgCl is more soluble than BaSO₄ (Ksp = 1.1 × 10⁻¹⁰) because both are 1:1, with molar solubilities 1.3 × 10⁻⁵ M and 1.0 × 10⁻⁵ M.
Unsaturated, Saturated, and Supersaturated
An unsaturated solution has Qsp below Ksp: it can still dissolve more solid. A saturated solution has Qsp equal to Ksp: it is at equilibrium, and added solid just sits there. A supersaturated solution has Qsp above Ksp: it holds more ions than equilibrium allows, so precipitation occurs until Qsp drops back to Ksp.
Supersaturated solutions are usually made by cooling a hot saturated solution or by mixing concentrated solutions quickly, and a tiny seed crystal can trigger sudden crystallization. Like all equilibrium constants, Ksp changes with temperature: for most salts dissolution is endothermic, so warming the solution increases Ksp and raises the solubility.
Worked Examples
Example 1: Ksp from molar solubility. The molar solubility of CaF₂ is 2.1 × 10⁻⁴ M. In the saturated solution [Ca²⁺] = s = 2.1 × 10⁻⁴ M and [F⁻] = 2s = 4.2 × 10⁻⁴ M. Then Ksp = (2.1 × 10⁻⁴)(4.2 × 10⁻⁴)² = (2.1 × 10⁻⁴)(1.76 × 10⁻⁷) = 3.7 × 10⁻¹¹.
Example 2: molar solubility from Ksp. For Mg(OH)₂, Ksp = 5.6 × 10⁻¹² and Ksp = 4s³. Then s = cube root of (5.6 × 10⁻¹² ÷ 4) = cube root of 1.4 × 10⁻¹² = 1.1 × 10⁻⁴ M, giving [Mg²⁺] = 1.1 × 10⁻⁴ M and [OH⁻] = 2s = 2.2 × 10⁻⁴ M.
Example 3: a fourth-root solubility. For Fe(OH)₃, Ksp = 2.8 × 10⁻³⁹ and Ksp = 27s⁴. Then s = fourth root of (2.8 × 10⁻³⁹ ÷ 27) = fourth root of 1.04 × 10⁻⁴⁰ = 1.0 × 10⁻¹⁰ M. The ion concentrations are [Fe³⁺] = 1.0 × 10⁻¹⁰ M and [OH⁻] = 3s = 3.0 × 10⁻¹⁰ M.
Example 4: will it precipitate? 50.0 mL of 2.0 × 10⁻⁴ M Ba(NO₃)₂ is mixed with 50.0 mL of 2.0 × 10⁻⁴ M Na₂SO₄, halving each concentration to [Ba²⁺] = 1.0 × 10⁻⁴ M and [SO₄²⁻] = 1.0 × 10⁻⁴ M. Then Qsp = (1.0 × 10⁻⁴)(1.0 × 10⁻⁴) = 1.0 × 10⁻⁸. Ksp for BaSO₄ is 1.1 × 10⁻¹⁰. Since Qsp exceeds Ksp, BaSO₄ precipitates.
Traps That Cost Marks in Topic 7.11
“Ksp includes the solid.” The solid never appears in the expression. Ksp for AgCl is [Ag⁺][Cl⁻].
“For CaF₂, Ksp = s³.” The fluoride concentration is 2s, and it is squared: Ksp = (s)(2s)² = 4s³. Dropping the multiplier or the power understates Ksp by a factor of 4.
“Ksp and molar solubility are the same number.” s is a concentration in mol/L. Ksp is built from concentrations raised to powers. For AgCl: s = 1.3 × 10⁻⁵ M, Ksp = 1.8 × 10⁻¹⁰.
“The salt with the smaller Ksp is always less soluble.” True only within one stoichiometry. CaF₂ (Ksp = 3.9 × 10⁻¹¹) is more soluble than AgCl (Ksp = 1.8 × 10⁻¹⁰) once both are converted to s.
“Use the concentrations printed on the bottles for Qsp.” Mixing dilutes them. Equal volumes halve each concentration, and Qsp must use the concentrations in the mixture.
“Adding more solid to a saturated solution raises [Ag⁺].” In a saturated solution Qsp already equals Ksp, so extra solid cannot dissolve and [Ag⁺] stays at 1.3 × 10⁻⁵ M at 25 °C.
Key Relationships
- Ksp is the equilibrium constant for a solid dissolving into its ions, with the solid itself omitted from the expression
- Each ion concentration is raised to its coefficient; coefficients become exponents, never multipliers
- Molar solubility s is in mol/L; ion concentrations are s times the ion’s coefficient in the equation
- 1:1 salts: Ksp = s²; 1:2 and 2:1 salts: Ksp = 4s³; 1:3 salts: Ksp = 27s⁴
- Ksp ranks solubility directly only between salts of the same stoichiometry; otherwise compare molar solubilities
- Qsp below Ksp is unsaturated, Qsp equal to Ksp is saturated, Qsp above Ksp precipitates until Qsp falls back to Ksp
- Mixing dilutes: equal volumes halve each ion concentration before Qsp is computed
- Ksp changes with temperature